Barber Chair Hydraulic Pump, 4 Bolt Pattern Pump,440 Lbs Weight Capacity, 26mm Shaft, Adjustable Height Chair Hydraulic Pump Parts for Most Standard Styling Chairs （Thread: M8

DetailsLever: This item has an ergonomically designed lever that has a suitable position. You can easily adjust the height of the lift pump without bending over.Strong Housing: The painted housing can make this lift pump not easy to rust, hardness is strong, and you can use a long time.ApplicationThis barber chair hydraulic pump is suitable as a replacement part for most standard styling chairs in bars, restaurants, hairdressers and other places.How to Confirm Whether It Matches Your Seat Needs to Pay attention to the Following Four Aspects.1. Upper interface requirements: Top thread of spindle: m8.2. Shaft Diameter: 26mm.3. Cone Ratio of shaft: 1:13.4. Requirements for base connection: 4 holes and the diagonal spacing of holes is 115mm. And please bring four M6 nuts.SpecificationModel: YL700Name: Barber Chair Hydraulic PumpPump Body Material: Cast Iron Pump Casing Material: PlasticSurface Treatment: PaintingColor: SilverWeighr Capacity: 200kg/440 poundsThread: M8Height: 38cm / 15.0inHeight After Stretching: 49cm / 19.3inAdjustable Height: 11cm / 4.3inConnecting Shaft Diameter: 2.6cm/ 1.02inHole Distance Between the Pump and the Base: 11.5cm/ 4.53inPackage Included1* Barber Chair Hydraulic PumpNotes1. The package does not contain the bottom disc and chair, so if you need it, please prepare it in advance. The product does not include chairs2. Please allow the slight color difference caused by the shooting light and 1-3cm error due to manual measurement, and make sure you do not mind before ordering.

• 🔺【Adjustable Height】This is a 4-bolt pattern pump, which has an adjustable height range of 11cm/ 4.3". You can install this hydraulic pump on the chair to adjust it to the right height for your needs, which is very practical. (The product does not include chairs)
• 🔺【 High Load-bearing Capacity】This barber chair hydraulic pump can withstand 440 pounds of weight, so you don't have to worry that it will break easily because of the weight-bearing problem.
• 🔺【High-quality Material】This chair hydraulic pump part’s body is made of cast iron and the pump has a plastic casing with painting technology, you do not have to worry about it will be deformed in transit and it has a longer service life.
• 🔺【Easy to Use】This adjustable barber salon styling chair replacement is easy to install and use; You only need to step on the lever to make the pump rise or fall. It is very labor-saving and does not need you to adjust it manually. As for the installation, you just need to install the lever and the plastic cover, then install the entire lift pump on the chair that you want to lift.
• 🔺【Ergonomic Design】Our barber chair hydraulic pump is ergonomically designed so you can simply step on the lever to raise or lower the chair without bending over. Replacement part for most standard style chairs in bars, salons, hair salons and other venues with four holes and diagonal holes spaced 4.53 inches from the base.